FCC Commercial Element 9 pool, section 34

Subelement D

Other GMDSS Equipment:

Section 34

SART:

34D1

How should the signal from a Search And Rescue RADAR Transponder appear on a RADAR display?

34D1

This question does not yet have an explanation! Register to add one

Tags: none

34D2

In what frequency band does a search and rescue transponder operate?

34D2

This question does not yet have an explanation! Register to add one

Tags: none

34D3

What causes the SART to begin a transmission?

A.
When activated manually, it begins radiating immediately.
Correct Answer
B.
After being activated the SART responds to RADAR interrogation.
C.
It is either manually or water activated before radiating.
D.
It begins radiating only when keyed by the operator.

34D3

This question does not yet have an explanation! Register to add one

Tags: none

34D4

At what interval must the SART's battery be replaced?

34D4

This question does not yet have an explanation! Register to add one

Tags: none

34D5

What are the characteristics of the SART transmitted signal?

A.
It starts with a sweep of 10.2 usec.followed by a sweep of 0.6 usec for a total of 10 sweeps.
B.
It starts with a sweep of 0.8 usec followed by a sweep of 12.6 usec for a total of 12 sweeps.
Correct Answer
C.
It starts with a sweep of 0.4usec across the entire 3 cm radar band followed by a returning sweep of 7.5 usec back to the beginning for a total of 12 sweeps.
D.
It starts with a sweep of 8.5 usec followed by a sweep of 0.4 usec for 10 sweeps.

34D5

This question does not yet have an explanation! Register to add one

Tags: none

34D6

What is the approximate distance between dots on a radar display at a distance of 5 miles?

34D6

o.64 is the right answer

Last edited by eckbookworm@gmail.com. Register to edit

Tags: none