Login or Register for FREE!
Subelement E
Antenna Systems
Section 43
Waveguides-2
A rotary joint is used to:
  • Couple two waveguides together at right angles.
  • Act as a switch between two waveguide runs.
  • Correct Answer
    Connect a stationary waveguide to the antenna array.
  • Maintain pressurization at the end of the waveguide.
This question does not yet have an explanation! Register to add one

Tags: none

Resistive losses in a waveguide are very small because:
  • Correct Answer
    The inner surface of the waveguide is large.
  • The inner surface of the waveguide is small.
  • The waveguide does not require a ground connection.
  • The heat remains in the waveguide and cannot dissipate.

Resistive losses in a waveguide are very small because:

The inner surface of the waveguide is large.

Mnemonic: "Large Surface, Low Resistance"

Last edited by kacela. Register to edit

Tags: none

A right-angle bend in an X-band waveguide must have a radius greater than:
  • Three inches.
  • Six inches.
  • One inch.
  • Correct Answer
    Two inches.
This question does not yet have an explanation! Register to add one

Tags: none

To insert RF energy into or extract RF energy from a waveguide, which of the following would not be used?
  • Correct Answer
    Coupling capacitance.
  • Current loop.
  • Aperture window.
  • Voltage probe.
This question does not yet have an explanation! Register to add one

Tags: none

The following is true concerning waveguides:
  • Conduction is accomplished by the polarization of electromagnetic and electrostatic fields.
  • Ancillary deflection is employed.
  • The magnetic field is strongest at the center of the waveguide.
  • Correct Answer
    The magnetic field is strongest at the edges of the waveguide.
This question does not yet have an explanation! Register to add one

Tags: none

At microwave frequencies, waveguides are used instead of conventional coaxial transmission lines because:
  • They are smaller and easier to handle.
  • Correct Answer
    They have considerably less loss.
  • They are lighter since they have hollow centers.
  • Moisture is never a problem with them.
This question does not yet have an explanation! Register to add one

Tags: none

Go to 42 Go to 44