Inmarsat Equip. & Comms:
Inmarsat Equip. & Comms:
Sat-C, Power up, Self-Test, Controls & Lamps
Which of the following actions should be taken once the vessel is berthed and will not leave port again for several weeks?
Which of the following actions should be taken once the vessel is berthed and will not leave port again for several weeks?
(C). The GMDSS Radio Operator may log out of the Inmarsat-C system and turn the power off (unless the vessel decides to leave the unit on during the port stay.)
Just remember the answer.
For more information, please see Furuno Electric Co's Operator's Manual (2002) for Inmarsat-C Mobile Earth Station Model Felcom 15, and (2003)
INMARSAT-C MOBILE EARTH STATION MODEL FELCOM 15.
Last edited by markadlerdallas. Register to edit
Tags: none
What action should always be taken before powering down an Inmarsat-C terminal or leaving one satellite footprint for another?
What action should always be taken before powering down an Inmarsat-C terminal or leaving one satellite footprint for another?
(D). Log out with the current NCS to inform them you are off the air or to enable a proper log in procedure with the new satellite.
Just remember the answer.
For more information, please see Furuno Electric Co's Operator's Manual (2002) for Inmarsat-C Mobile Earth Station Model Felcom 15, and (2003)
INMARSAT-C MOBILE EARTH STATION MODEL FELCOM 15.
Last edited by markadlerdallas. Register to edit
Tags: none
With most Inmarsat-C systems what should the indicator lamps do when powering up?
With most Inmarsat-C systems what should the indicator lamps do when powering up?
(A). All lamps should illuminate in a particular sequence, as per the operator's manual.
Just remember the answer.
For more information, please see Furuno Electric Co's Operator's Manual (2002) for Inmarsat-C Mobile Earth Station Model Felcom 15, and (2003)
INMARSAT-C MOBILE EARTH STATION MODEL FELCOM 15.
Last edited by markadlerdallas. Register to edit
Tags: none
What is the importance of a successful log in indication, after power-up, on an Inmarsat-C terminal?
What is the importance of a successful login indication, after power-up, on an Inmarsat-C terminal?
(B). The terminal is enabled for routine incoming and outbound traffic.
Just remember the answer
For more information. please see Furuno Electric Co's Operator's Manual (2002) for Inmarsat-C Mobile Earth Station Model Felcom 15, and (2003)
INMARSAT-C MOBILE EARTH STATION MODEL FELCOM 15.
Last edited by markadlerdallas. Register to edit
Tags: none
On an Inmarsat-C system, what is the importance of a successful “SYNC” indication after power up?
On an Inmarsat-C system, what is the importance of a successful "SYNC" indication after power up?
(B). Sufficient signal strength on the NCS common channel is being received.
Just remember the answer.
For more information, please see Furuno Electric Co's Operator's Manual (2002) for Inmarsat-C Mobile Earth Station Model Felcom 15, and (2003)
INMARSAT-C MOBILE EARTH STATION MODEL FELCOM 15.
Last edited by markadlerdallas. Register to edit
Tags: none
On an Inmarsat-C system an incoming EGC alarm sounds:
On an Inmarsat-C system an incoming EGC alarm sounds:
(C). To draw the operator's attention to an unscheduled Distress or Urgency message.
Just remember the answer.
For more information about EGC function, please see Furuno Electric Co's Operator's Manual (2002) for Inmarsat-C Mobile Earth Station Model Felcom 15, and (2003)
INMARSAT-C MOBILE EARTH STATION MODEL FELCOM 15.
Use Ctrl-F and search on EGC.
Last edited by markadlerdallas. Register to edit
Tags: none